Livelynine Brushed Nickel Vinyl Peel and Stick Wallpaper Decorative Stainless Steel Contact Paper for Countertops Kitchen Cabinets Appliances Dishwasher Fridge Refrigerator Stove Covers 15.8×78.8 Inch

Price: $8.99
(as of Feb 13, 2022 06:59:42 UTC – Details)

Product Description

ATTENTION

Stainless steel contact paper made of vinyl that imitates the look of brushed nickel, not real stainless steel sheet. It need your 100% patience to intall, please kindly acknowledge before purchase.

Used:

-Fridge, dishwasher, refrigerator, dryer, stove, kitchen appliances, kitchen backsplash, countertops, table, cabinets, cupboards, pantry, shelves, Walls, counter, bedside tables, nightstands, wardrobes, accent walls, dresser drawer, closets, TV stand, vanity, windows privacy, crafts, book covers, bulletin board, desk cover, doors, windows etc.

-Kitchen, Bathroom, Bedroom, Living room, College, Dorm room, Farmhouse, Industrial, Playroom, Cabin, Cubicle, Lake house, Laundry room, Entryway, Office decor etc.

Stainless steel contact paper for kitchen appliances

Peel and stick stainless steel film for dishwasher

Stainless steel contact paper for appliances

Stainless steel wrap for refrigerator

Applying Stainless Steel Contact Paper

You can easily apply the contact paper to appliances at home. The following DIY instructions will help you cover your refrigerator.

Step 1: Measure the surface area of the front and both the sides of the refrigerator, except the rear. Also measure the edges of the doors if you intend to cover them too.

Step 2: Take off the handles of the refrigerator if possible.

Step 3: Clean all the surfaces of the refrigerator that you wish to cover, using a kitchen cleaner.

Step 4: Wipe the refrigerator dry using a sponge cloth.

Step 5: Cut a sheet of contact paper according to the measurement of one side of the refrigerator, e.g. the left side.

Step 6: Peel off the top of the paper backing, and line up the top of the contact paper with the topmost border of the refrigerator. Gently press and stick the contact paper downwards, while simultaneously peeling the paper backing from behind. While doing so, make sure that the paper does not crease or trap air bubbles inside. Continue doing this till you cover the entire surface and reach the bottom border of the refrigerator.

Step 7: Squeegee the contact-paper applied surface to remove any extra traces of air bubbles.

Step 8: Apply the contact paper to the remaining sides in this similar fashion. However, while applying the paper to the front, cut it around the drink dispensers or handles that cannot be removed, using a utility knife. If you have removed the handles, use an ice pick to make holes in the contact paper at the screw holes. Reattach the handles once you are done with applying and squeegeeing the contact paper.

The same steps apply for covering other appliances too. However, before applying the contact paper, you need to ensure that the surface is free from grime. This is because, even the minutest dust particle will show underneath the paper. Also, if your measurements turn out be inaccurate, then your paper, time, and effort will go waste. Therefore, take care of the small details as discussed above, and you will have a newly renovated kitchen in no time, that too without much expense.

Step 1. Prepare the surface and tools

Make sure the surface to be covered is cleaned, dry,

and free from grease. If the surface is rough or uneven,

rub it over with sandpaper to smooth and level it

Step 2. Measure surface and cut wallpaper

Measure the length and width of the surface to be covered,

If the surface shape is complex one, sketch a rough outline

of it in a notebook and write measurements for each part

of the outline on your sketch.

Step 3. Apply peel and stick

Smooth the wallpaper flat and make sure it will fit the surface properly

,free one corner of the backing paper,then pull more backing paper free

until expose around 1/4 inch of backing.Press the 1/4-inch wallpaper

against the surface you wish to cover. Work slowly from one corner of

the strip to the other.

Step 4. Smoothing the wallpaper to avoid wrinkles and air bubbles. Trim off excess

Gently pull the rest of the 1/4-inch paper.Take your time to get this right.

Working from side-to-side to keep the paper smooth,flatten out wrinkles

and expel any air that might get trapped and form a bubble.If wrinkles and

bubbles do occur,gently tear the wallpaper free and try again

Continue drawing off the backing and smoothing until the whole surface has been covered. Trim off any excess wallpaper.

How to install ?

Installation guide come packed with wallpaper roll. Kindly unpack it carefully. Stainless steel look wallpaper is similar with real metal finish, please careful to avoid making crease before stick.

Is it wide enough ?

It is 15.8 inch wide. If the surface going to be covered is wider. please kindly overlap the edge of wallpaper to cover whole item, the seam is invisible. or below have wider width contact paper for choose.

Wrinkles or bubbles ?

Incorrected installation would form bubbles or wrinkles, please take your time to install. If bubbles do occur, please use a small pin to poke the bubble and smooth down from edge toward hole.

Can I do it alone ?

Two Are Better Than One.

Waterproof

✓

✓

✓

✓

✓

✓

Removable

✓

✓

✓

✓

✓

✓

Peel and Stick

✓

✓

✓

✓

✓

✓

Where was wallpaper used ?
Hallway, kitchen, bathroom, bedroom, reception room. walls, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets, vanity. Kitchen, fridge, refrigerator, freezer, dishwasher, kitchen appliances, bathroom, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets. Hallway, kitchen, bathroom, bedroom, reception room. walls, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets, vanity. Kitchen, fridge, refrigerator, freezer, dishwasher, kitchen appliances, bathroom, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets. Hallway, kitchen, bathroom, bedroom, reception room. walls, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets, vanity. Hallway, kitchen, bathroom, bedroom, reception room. walls, counter, furniture, countertops, desk, table, laundry room, powder room, kids room, drawers, dresser, cuboard, backsplash, dining room, cabinets, vanity.

Stainless Steel Contact Paper
Peel and Stick
🏠DETAILS: Size 15.8 X78.8 Inch, total 8.65 square feet(40cmX2m), Self adhesive(No glue needed). Made of vinyl, silver stainless steel effect surface, oilproof, waterproof. Fully removable.
🏠DIY FREELY: Trimming gridlines on backing paper for precise measurements, cut to any sizes, peel and stick on any smooth appliances. Premium Painting Ensures No Fading for Years.
🏠All-PURPOSE: Contact paper for appliances, peel and stick stainless steel for refrigerator wrap, decorative covers for fridge/dishwasher cover, heat resistant contact paper for kitchen, stainless steel backsplash for stove, metal backsplash panels for kitchen, alternative to stainless steel paint.
🏠WARRANTY: If our stainless steel wrap is not everything that we say it is, and you’re not completely satisfied with it within 30 days of purchase; we will refund every penny of your money, straight away.
🏠USE: Stainless steel contact paper for appliances, refrigerator, fridge, dishwasher, stove, freezer, countertop, kitchen counter top, kitchen cabinets, door, vanity, pantry, dining table, desk, crafts, cupboards, dresser, drawer, closets, kitchen appliance, backsplash behind stove, dorm, farmhouse, office decor.