8 in 1 Digital Tape Measure, Multifunctional Electronic Tape Measure with LCD Display, Length Measuring Tool for Flat Curved (Black)

Product Description

ON/OFF

Press the switch briefly for about 1 second to turn on the power; Long press the switch for about 5 seconds to turn off; 180 seconds without operating system will automatically shut down. Breathing light stays on after power on, ready for measurement.

Start Measurement

By keeping the small Q-roller in contact with the measurement object and sliding it, the measurement data will be displayed in real time. The measurement data will be displayed on the screen in real time. During the measurement, the breathing light will flash to indicate this. When the measurement is stopped, the light is always on.

Continuous Measurement

Enter the measurement, keep the small Q in contact with the measured object and roll it, when the small Q stops rolling, the After the screen data is kept for 30s, the current measured data is cleared to zero, and the measurement can be made again. At this time, the data at the top right of the screen is the historical accumulative data, and the data at the bottom is the current single measurement data.

Data Zeroing

Short press the middle measurement key for 1 second to clear the current measurement data with one click. This final totalization the measured data will be automatically stored inside.

Automatic Storage

When in the measurement state, 30 seconds without any operation, the system will automatically store the current measurement data.

History

In the main page status, press the right triangle key 2 to switch to the history page, in this status In this state, press the left and right triangle keys to scroll up and down through the last 10 sets of data.

A. Switching Measurement Units Boot

In this mode, short press the left and right triangle key 2 or 3 to switch the measurement unit cm/in. Short press 1 for 1 second to confirm this setting and go to the next setting item.

B. Accuracy Setting ACCC

In this mode, the default accuracy is 100%, short press the left and right triangle key 2 or 3 to to make the measurement data bigger or smaller (percentage mode), each press will increase/decrease 0.1% . Press 1 to confirm the setting and go to the next setting.

C. Speaker Setting SPE

In this mode, press the left and right triangle keys to set the speaker to ON/OFF. Short press the middle key 1 to confirm the setting. The default state of the system is audible ON.

D. Backlight Setting LIG

180 seconds without operation automatically shut down (unless the power is on, otherwise press any other key systemNo response). This page allows you to set the time for the display to light up after measurement. In this mode, the can choose the backlight length 30, 45, 60, 90, 120 seconds can be set, short press the middle key 1 to confirm the setting, The system default backlight time is 45 seconds, when the backlight is off, press any key or scroll wheel to restore the backlight time. When the backlight is off, press any key or scroll wheel to restore the backlight.

E. Setup Complete

Press the middle key 1, all settings take effect, then the breathing light is always on and the system returns to the standby mode measurement mode.

F. Charging Mode

The indicator light breathes and flashes when charging, and is always on when fully charged.

Package Dimensions ‏ : ‎ 4.69 x 2.64 x 0.83 inches; 2.4 Ounces
Date First Available ‏ : ‎ December 23, 2021
Manufacturer ‏ : ‎ TOTOKA
ASIN ‏ : ‎ B09P3T7NZV
Country of Origin ‏ : ‎ China

【Multifunctional Digital Tape Measure】– Compared with traditional tape measure, our tape measure set can not only perform the work of ordinary tape measure excellently, but can also measure irregular surfaces and shapes such as clothing, and is a fantastic technology equipment that can measure curved surfaces. This tape measure tool is ideal for professionals such as craftsmen and tailors.
【Up to 10 practical functions】– Such as straight line measurement, round measurement, arbitrary curve measurement, irregular surface measurement, cylindrical diameter measurement, accumulation/subtraction of 10 historical records, measurement prompt sound, measurement breathing light , Unit switching, etc.; easily cover your various measurement needs.
【Lightweight & Portable】– 15mm in thickness, and 30g in weight. It is only 1/3 the size of an ordinary tape measure and 1/4 the weight, which is convenient for you to carry and measure at any time.
【99m Ultra-Long Distance Measurement】– The digital tape measure ruler supports single range 0-9 meters distance measurement, the cumulative distance measurement can be up to 99 meters. Millimeter-level measurement data makes the measurement results more accurate and precise. In addition, the electronic ruler also has 10 sets of historical records, you can check and view it at any time that making your measurement work more simple and efficient.
【Satisfaction Guarantee】– The electronic tape measure ruler equipped with ultra-low power consumption semiconductor microprocessor to achieve super long standby and battery life. Imported TDK inductor, capacitor, low inertia high precision digital encoder, high precision CNC processing of the metal shell and high precision nylon gear, to achieve long service life.